SUPER SLAG ABRASIVE
- Super Slag (Super Slag Abrasive) is a blasting abrasive made from Steel Slag Atomizing Process.
- Super Slag is a substitute for sand and copper Slag, which are generally used for blasting jobs.
- Super Slag is better in performance as compared to Copper Slag in terms of profile and roughness.
- Super Slag can be reused for three times whereas copper slag cannot be reused.
- Super Slag is an eco-friendly blasting abrasive since it emits very less amount of dust during the process of blasting.
TECHNICAL SPECIFICATION OF SUPER SLAG ABRASIVES
| S. No | Parameter | Unit | Result |
|---|---|---|---|
| 1 | Water – Soluble Contaminants by conductivity | mS/m | 8.8 |
| 2 | Water – Soluble Chlorides | % | 0.0000 |
| 3 | Hardness | - | 643 HV 0.1 |
| 4 | Hardness by a glass slide test | - | Above 6 |
| 5 | Apparent Density | - | 3.48 |
| 6 | Moisture | % | 0.01 |
| 7 | SiO2 | % | 18.0 |
| 8 | Al2O3 | % | 9.84 |
| 9 | CaO | % | 26.0 |
| 10 | MgO | % | 7.99 |
| 11 | Fe2O3 | % | 34.1 |
| 12 | TiO2 | % | 0.85 |
| 13 | MnO | % | 1.89 |
| 14 | Na2O | % | 0.00 |
| 15 | Cu | mg/L | 0.007 |
| 16 | Cd, Pb, Hg, As, Cr6+, CN- | mg/L | Not Detected |
| 17 | Oil & Grease | % | Not Detected |
| 18 | Available Physical Size | mm | < 0.6 mm, 0.2 to 0.8 mm, 0.6 to 1 mm, 0.6 to 2 mm and 1 to 2 mm |